L&H Threaded Rods L&H Threaded Rods

 

U-Bolts

U-Bolt Benders

Customers

Logistics

Ferndale

Our equipment consists of modern, lightweight Freightliner Century-class tractors with a distinct color combination.

News

John Gray

Current News
During 2007, L&H, in partnership with Standens Limited of Alberta, Canada, will open a W.F.O.E manufacturing company in XuZhou, JiangSu Province, China. This company, called Standen’s L&H Xuzhou, LTD., will manufacture Leaf Springs and
U-Bolts for the Chinese truck and trailer market.


Contact






Recommended U-Bolt Torque
For Cold-Formed U-Bolts
For Cold-Formed U-Bolts which have been torqued to a set preload are recommended to be re-torqued after a short time to take up the stretch in the set of the material.


U-Bolts that have been well lubricated with an anti-seize compound will have a torque range between plated and unplated values. All the above values are general guidelines.
The OEM Service Manual on specific models
always takes precedence over values shown.


U-Bolts Must Be Tightened and Torqued Using A Cross Pattern Sequence

Snug U-Bolts in the seqence shown.
Tighten completely in the sequence shown.
Check U-Bolts for tightness after 100 miles